• úvod
  • témata
  • události
  • tržiště
  • diskuze
  • nástěnka
  • přihlásit
    registrace
    ztracené heslo?
    DELVITLinux pro zacatecniky a obycejne uzivatele (NO FLAMES!)
    CHOROBA
    CHOROBA --- ---
    WELES:
    si na plose udelej novej soubor enemy_territory.sh dej mu prava na execution a dovnitr nakopiruj et +set s_alsa_pcm plughw:0 +set s_numberOfSpeakers2
    uloz a spust
    WELES
    WELES --- ---
    nojo, jenže to budu muset pokaždý spouštět z terminálu i s těma parametrama
    PUNKREASS
    PUNKREASS --- ---
    WELES: tak to pust z terminalu
    WELES
    WELES --- ---
    Ok, tak jsem u ET narazil ještě malej háček, nejde mi zvuk, návod radí

    "Nejde-li zvuk, upravte ikonu tak, aby příkaz vypadal takto: ./et +set s_alsa_pcm plughw:0 +set s_numberOfSpeakers2"

    ale netuším, jak to udělat pod unity
    WELES
    WELES --- ---
    ha, s mezerou to fachčilo :D dík, už můžu pařit enemy territory :D
    TOMINO_I
    TOMINO_I --- ---
    WELES: pokudcsi to rozbalil nekam do home, tak sudo met nemusis na zmenu pravacna spusteni cili by melo stacit jenom toto:
    chmod +x jmenosouboru.run
    CHOROBA
    CHOROBA --- ---
    musis tam mit mezeru voe :)
    WELES
    WELES --- ---
    Po zadání sudo chmod +x ./jemnosouboru.run a root hesla mi vypsal "chmod: po „+x./et-linux-2.60.x86.run“ chybí operand" a help na chmod mi osobně moc informací nepřinesl.
    CHOROBA
    CHOROBA --- ---
    sudo chmod +x ./jemnosouboru.run
    v terminalu a pak
    sudo ./jemnosouboru.run
    WELES
    WELES --- ---
    No v podstatě jde o tohle http://www.linuxsoft.cz/article.php?id_article=573 Když postupuju podle návodu, tak se nezdaří ta autentizace, když to spouštím jako sudo, tak to ten soubor nepoznává jako program a nechce mi ho spustit (v terminálu)
    TOMINO_I
    TOMINO_I --- ---
    CHOROBA: Neni to trochu divny spoustet instalacu pres sudo?

    WELES: Kam se to snazi zapisovat? To nevidis v consoli?
    Btw.mozna to ISO nebo CD (DVD) namountit nekam do /home adresara. Treba by to pomohlo.
    CHOROBA
    CHOROBA --- ---
    spust to jako administrator. nebo z console sudo ./jmenoinstalatoru.sh
    nebo v consoli su a pak ./jmenoinstalatoru.sh
    WELES
    WELES --- ---
    Ahoj,
    mám malou potíž. Pokouším se nainstalovat wolfenstein enemy territory na linux, ale instalátor má potíže s autorizací. I když jsem si 100% jistej, že zadávám správné heslo, instalátoru se nepodaří získat práva na umístění souborů, nějaké rady?
    ERGOSUM
    ERGOSUM --- ---
    Podobné mě potkalo, když jsem přenesl NAS. Doma fungoval, na jiném routeru ne. Příčinou byla neodpovídající maska a porty.
    MR_DAN
    MR_DAN --- ---
    DICK85: no dole v tom konfiguraku smb.conf, kde jsou Share Definitions
    mas tam vse zakomentovane krome [printers] a [homes] ale nikde neni definovany zadny adresar, co chces sdilet
    za tim odkazem je i sekce "19.4.2. Command Line Configuration" (proc jsou vsichni lini trochu odscrollovat?)
    DICK85
    DICK85 --- ---
    MR_DAN: v první řadě nemám grafické prostředí. A dole není uplně přesné určení kde mi něco chybí :-)
    DICK85
    DICK85 --- ---
    MR_DAN: přesně jak píše klienti mají přistup do pracovní skupiny MARUTO01. V budoucnu budu chtít sdílět i jiné adresáře,ale teď je pro mě primarní rozchodit to a pak stím něco koumat dál.
    MR_DAN
    MR_DAN --- ---
    DICK85: a to co je v "SELINUX NOTES:" jsi cetl/delal?
    klientsky pocitace maji pristup do workgroupy "MARUTO01"?
    jaky adresare chces sdilet? jen Home Directories? mam takovej pocit ze takhle to nestaci.. (jestli jde jen o tiskarny tak me ignoruj, o tech vim kulovy)
    DICK85
    DICK85 --- ---
    VLASTIS: já jsem z toho trochu jelen. Možná mám problém už v smb.conf tak ho sem projistotu dám. Porty jsou povoléné to je jediné co sem zvládnul zjistit.

    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options (perhaps too
    # many!) most of which are not shown in this example
    #
    # For a step to step guide on installing, configuring and using samba,
    # read the Samba-HOWTO-Collection. This may be obtained from:
    # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
    #
    # Many working examples of smb.conf files can be found in the
    # Samba-Guide which is generated daily and can be downloaded from:
    # http://www.samba.org/samba/docs/Samba-Guide.pdf
    #
    # Any line which starts with a ; (semi-colon) or a # (hash)
    # is a comment and is ignored. In this example we will use a #
    # for commentry and a ; for parts of the config file that you
    # may wish to enable
    #
    # NOTE: Whenever you modify this file you should run the command "testparm"
    # to check that you have not made any basic syntactic errors.
    #
    #---------------
    # SELINUX NOTES:
    #
    # If you want to use the useradd/groupadd family of binaries please run:
    # setsebool -P samba_domain_controller on
    #
    # If you want to share home directories via samba please run:
    # setsebool -P samba_enable_home_dirs on
    #
    # If you create a new directory you want to share you should mark it as
    # "samba_share_t" so that selinux will let you write into it.
    # Make sure not to do that on system directories as they may already have
    # been marked with othe SELinux labels.
    #
    # Use ls -ldZ /path to see which context a directory has
    #
    # Set labels only on directories you created!
    # To set a label use the following: chcon -t samba_share_t /path
    #
    # If you need to share a system created directory you can use one of the
    # following (read-only/read-write):
    # setsebool -P samba_export_all_ro on
    # or
    # setsebool -P samba_export_all_rw on
    #
    # If you want to run scripts (preexec/root prexec/print command/...) please
    # put them into the /var/lib/samba/scripts directory so that smbd will be
    # allowed to run them.
    # Make sure you COPY them and not MOVE them so that the right SELinux context
    # is applied, to check all is ok use restorecon -R -v /var/lib/samba/scripts
    #
    #--------------
    #
    #======================= Global Settings =====================================

    [global]

    # ----------------------- Network Related Options -------------------------
    #
    # MARUTO01 = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
    #
    # server string is the equivalent of the NT Description field
    #
    # netbios name can be used to specify a server name not tied to the hostname
    #
    # Interfaces lets you configure Samba to use multiple interfaces
    # If you have multiple network interfaces then you can list the ones
    # you want to listen on (never omit localhost)
    #
    # Hosts Allow/Hosts Deny lets you restrict who can connect, and you can
    # specifiy it as a per share option as well
    #
    workgroup = MARUTO01
    server string = ServerOS

    ; netbios name = CentOS

    ; interfaces = lo eth0 192.168.1.2/24 192.168.1.254/24
    ; hosts allow = 127. 192.168.1.

    # --------------------------- Logging Options -----------------------------
    #
    # Log File let you specify where to put logs and how to split them up.
    #
    # Max Log Size let you specify the max size log files should reach

    # logs split per machine
    log file = /var/log/samba/log.%m
    # max 50KB per log file, then rotate
    max log size = 50

    # ----------------------- Standalone Server Options ------------------------
    #
    # Scurity can be set to user, share(deprecated) or server(deprecated)
    #
    # Backend to store user information in. New installations should
    # use either tdbsam or ldapsam. smbpasswd is available for backwards
    # compatibility. tdbsam requires no further configuration.

    security = user
    passdb backend = tdbsam


    # ----------------------- Browser Control Options ----------------------------
    #
    # set local master to no if you don't want Samba to become a master
    # browser on your network. Otherwise the normal election rules apply
    #
    # OS Level determines the precedence of this server in master browser
    # elections. The default value should be reasonable
    #
    # Preferred Master causes Samba to force a local browser election on startup
    # and gives it a slightly higher chance of winning the election
    ; local master = no
    ; os level = 33
    ; preferred master = yes

    #----------------------------- Name Resolution -------------------------------
    # Windows Internet Name Serving Support Section:
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    #
    # - WINS Support: Tells the NMBD component of Samba to enable it's WINS Server
    #
    # - WINS Server: Tells the NMBD components of Samba to be a WINS Client
    #
    # - WINS Proxy: Tells Samba to answer name resolution queries on
    # behalf of a non WINS capable client, for this to work there must be
    # at least one WINS Server on the network. The default is NO.
    #
    # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
    # via DNS nslookups.

    ; wins support = yes
    ; wins server = w.x.y.z
    ; wins proxy = yes

    ; dns proxy = yes

    # --------------------------- Printing Options -----------------------------
    #
    # Load Printers let you load automatically the list of printers rather
    # than setting them up individually
    #
    # Cups Options let you pass the cups libs custom options, setting it to raw
    # for example will let you use drivers on your Windows clients
    #
    # Printcap Name let you specify an alternative printcap file
    #
    # You can choose a non default printing system using the Printing option

    load printers = yes

    cups options = raw

    ; printcap name = /etc/printcap
    #obtain list of printers automatically on SystemV
    ; printcap name = lpstat
    ; printing = cups

    # --------------------------- Filesystem Options ---------------------------
    #
    # The following options can be uncommented if the filesystem supports
    # Extended Attributes and they are enabled (usually by the mount option
    # user_xattr). Thess options will let the admin store the DOS attributes
    # in an EA and make samba not mess with the permission bits.
    #
    # Note: these options can also be set just per share, setting them in global
    # makes them the default for all shares

    ; map archive = no
    ; map hidden = no
    ; map read only = no
    ; map system = no
    ; store dos attributes = yes


    #============================ Share Definitions ==============================

    [homes]
    comment = Home Directories
    browseable = yes
    writable = yes
    ; valid users = %S
    ; valid users = MYDOMAIN\%S

    [printers]
    comment = All Printers
    path = /var/spool/samba
    browseable = no
    guest ok = no
    writable = no
    printable = yes

    # Un-comment the following to provide a specific roving profile share
    # the default is to use the user's home directory
    ; [Profiles]
    ; path = /var/lib/samba/profiles
    ; browseable = yes
    ; guest ok = yes


    # A publicly accessible directory, but read only, except for people in
    # the "staff" group
    ; [public]
    ; comment = Public Stuff
    ; path = /home/samba
    ; public = yes
    ; writable = yes
    ; printable = no
    ; write list = +staff
    Kliknutím sem můžete změnit nastavení reklam